Fuji Xerox 1015S Series Instruction Manual page 141

When Bound Originals is selected,
the original orientation will be
automatically set. As the original
orientation will be set as Head to
Top when Left Page Then Right or
Right to Left Page is selected, and
as Head to Left when Top Page
Then Bottom is selected, be sure
to load your documents correctly.
For details on image orientation,
refer to "5.14 Specifying Image
Orientation".
To cancel any setting, select Cancel.
2
Select Bound Originals on the Added Features screen.
Basic Added
Features Features
Edge Erase
T/B: 0.1/ 0.1"
L/R: 0.1/ 0.1"
Bind: 0.0"
Bound Originals
Off
Book Duplex
Off
The Bound Originals (Scan Order) screen is displayed.
3
Select the Bound Originals option and the pages of the bound
document to be copied.
Here, we will illustrate by selecting Left Page Then Right and Both Pages.
Bound Originals (Scan Order)
Off
Left Page
Then Right
Right Page
Then Left
Top Page
Then Bottom
If Left Page Only or Right Page Only is selected, only the image on the left
pages or the right pages will be copied as a page image in the scanned order.
4
To specify Binding Erase, use
5
Check the orientation of the document.
6
Select Save to specify settings for other features if necessary.
7
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
5.13 Copying Facing Pages onto Separate Sheets
Image Quality Output Format
Margin Shift
S1: No Shift
S2: No Shift
Original Orientation
Head to Top
Binding Erase
Both Pages
(0.0-2.0)
Left Page
"
0.0
Only
Right Page
Only
to specify the value.
Stored
Job Templates
Original Size
Size Detect
Mixed Size Originals
Off
Cancel Save
Load your originals
as shown below.
115