Table of Contents
Advertisement
9.2.6
Inside Copier
The following message will be displayed if paper is jammed at the transfer module of the machine.
Follow the instructions below to clear the jammed paper.
Never touch the areas on or near the fuser unit that are affixed with labels like Hot Surface
and CAUTION. You can get burnt as a result.
The following error message is displayed when paper jam occurred at the four named locations inside the machine. The error
message displayed differs according to the location of the paper jam.
Paper Jam
1.
Remove jammed sheets from areas
[1], [3] and [4].
2.
Remove paper from areas [2] on the
transfer module.
3.
Push in transfer module.
Procedure
1
Open the front door.
2
Turn the green lever at the
center
of
the
module to the right until it
is in the horizontal position
and then pull the transfer
module out to the end.
9.2 Clearing Paper Jams
transfer
343
Advertisement
Table of Contents
Troubleshooting
