Fuji Xerox 1015S Series Instruction Manual page 375

Paper jam at levers R3a and R3b
The following message will be displayed if paper is jammed at levers R3a and R3b of the finisher.
Follow the instructions below to clear the jammed paper.
Paper Jam
1. Open Finisher left door.
2. Move lever R3b and remove jammed sheets.
R3b
3. Move lever R3a and remove jammed sheets.
4. Return all levers to original positions.
Close Finisher left door.
Procedure
1
Open the left door of the finisher.
2
Move lever R3b to remove
the jammed paper.
3
If you cannot remove the
paper in Step 2, lift up
lever R3a to remove the
jammed paper.
4
If the paper is torn, check that no torn pieces are left in the
machine.
9.2 Clearing Paper Jams
349