Fuji Xerox 1015S Series Instruction Manual page 384

9.2 Clearing Paper Jams
Paper jam at knob R7, levers R8a/area R8b, and tri-fold output tray R9
The following message will be displayed if paper is jammed. Follow the instructions below to clear the
jammed paper.
You cannot open both levers R8a
and R8b at the same time. Open
one lever R8b, after swinging back
the other lever R8a.
358
Paper Jam
1.
2.
R8a
3.
4.
Procedure
1
Open the right door of the finisher.
2
Pull out the tri-fold output
tray R9, swing lever R8a
to the right, and remove
the jammed paper.
3
If you cannot remove the
paper in Step 2, swing
back lever R8a and swing
lever R8b to the right, turn
knob R7 to the right, then
remove
paper.
4
If the paper is torn, check that no torn pieces are left in the
machine.
Open Finisher right door and pull out Tri-Fold
Output Tray R9.
Move lever R8a and remove sheets.
Open Lever R8b and turn Knob R7 anti-clockwise.
Remove jammed sheets.
Return all levers and Tri-Fold Output Tray to
original positions. Close Finisher right door.
the jammed