Fuji Xerox 1015S Series Instruction Manual page 257

The setting for stapling or punching
specifies a position on output paper.
Set the position to a file that is
output with the face down.
To check the document image
position after priority stapling or
punching, it is recommended to
check the results by Print First
Page.
If the files has been programmed
with the Folding or Booklet Creation
feature, you cannot select Add
Finishing.
4
Select the print type as required.
The setting here has higher priority than that at file saving, but is not saved.
Print File
The Start button has been pressed. Select various options below if necessary.
Select Add Finishing to add a Staple/Punch Position to the file
you want to print.
Select Output Orientation to determine how the output is delivered.
Select 2 Sided to print the file 1 sided or 2 sided.
Select Paper Supply to choose a different tray to print the file.
Note: These settings will temporarily overwrite the original file settings
but will not be saved. The scanned images cannot be edited.
Select Print First Page to print the first page of the file.
Or, press Start or Start Printing to begin printing.
Add Finishing
Off
Paper Supply
Off
When stapling/punching:
You can set stapling or punching. The selected file has been programmed with
the stapling or punching feature, this setting is cleared.
(1)Select Add Finishing.
The Add Finishing screen appears.
(2)Select a stapling or punching position.
For punch, only single position (portrait direction) can be specified.
Add Finishing
You can add a Staple/Punch Position to the file you want to print.
It is recommended to confirm the selected Staple/Punch Position
by using the Print First Page option.
Note: Stapling/Punching is performed along the paper edges that
are close to the output gate of the output tray.
Staple Position
Auto
None
2 Staples
(3)Select Save.
The display returns to the Print File screen.
6.6 Printing Files
Output Orientation 2 Sided
Auto Auto
Print
First Page
Punch Position
Auto
Front 1 Staple None
2 Holes
Rear 1 Staple
4 Holes
Previous
Screen
Start
Printing
Save
231