Copying Mixed Size Originals; Copying Mixed Size Originals [Mixed Size Originals] - Fuji Xerox 1015S Series Instruction Manual

This feature allows you to scan documents of various sizes before copying them onto the corresponding copy
paper sizes. Alternatively, you can make copies of these documents on one selected paper size.
This feature only works when documents are loaded in the DADF.
Only standard-sized documents can be used for this feature.
You cannot select Mixed Size Originals in combination with Multiple Up, Repeat Image, or Bound Originals.
Off
Select this when the document sizes are all the same.
On
Selecting this when copying documents of various sizes will enable the sizes to be detected automatically
and then copied on suitable copy paper sizes. When Reduce/Enlarge is specified, the copies will be made
on paper sizes based on the reduction/enlargement percentage.
Document
A
B
Report
2
1
Edge A of the document refers to
the edge that is to be inserted into
the DADF.
"3.2.2 Loading in DADF"
Ensure that edge A of the
documents are aligned to the edge
of the DADF.
118

Copying Mixed Size Originals

5.15
Copies of similar size as documents
Report
1
3
Procedure
1
Align edge A and B of the
documents.
Remove any staples or clips.
Copies might not be done well if
the edge B of the documents are
not aligned properly.
2
Load
aligned to the edge of the
DADF.
Align edge A of the documents
with the feeding point of the
DADF and
documents with the document
guide.
Mixed Size Originals
A
B
2
3
the documents
then align the
Copies of similar size
A
Report
B
3
2
1