Fuji Xerox 1015S Series Instruction Manual page 63

For details on the Auditron
Administration mode, refer to "8.5
Auditron Menu".
After a while, the following screen is displayed and operation is switched from
the main control panel to the copier control panel.
To return to the normal programming screen, exit administration mode
using the control panel of the copier and select Back on this screen.
The control panel of the copier is in front of the Document Feeder.
4
Lift the cover of the copier
control panel.
5
Select Tools Mode.
Tools Mode
Menu
The Tools Password Entry screen is displayed.
2.3 Checking/Changing Paper Supply Settings
Tools Mode Auditron
Administrator Mode
Back
Close
37