Fuji Xerox 1015S Series Instruction Manual page 89

"5.23 Inserting Transparency
Separators"
4
Select Save to specify settings for other features if necessary.
5
Load separators if needed.
Proceed to Step 6 if no
separator is required.
Load the separators in the same
orientation and of the same paper
size as the transparencies in trays
1-4 or the optional trays 6 (HCF) or
7.
When loading separators:
(1)Select Output Format and then Transp Separators.
Basic Added
Features Features
Multiple Up
1 Up
Repeat Image
Off
Annotation
Off
The Transparency Separators screen is displayed.
(2)Select On and specify whether or not to copy on the
separators.
When On is selected for Transparency Separators, option buttons to specify
whether to print on the separators and Paper Tray Settings are displayed on
the right of the screen.
Transparency Separators
Off
On
Select Blank Separators to make copies with blank separators inserted.
Select Printed Separators to make copies on both the transparencies and
separators inserted.
4.4 Copying on Transparency
Image Quality Output Format
Transp. Separators
Off
Covers
No Covers
Tab Copying
Off
Cancel
Paper Tray Settings
Transp: Tray 5 Bypass
A4 P
Transp
Blank
Separators
Sep: Tray 6
A4 P
Plain
Printed
Separators
Stored
Job Templates
Output Orientation
Auto
Booklet Creation
Off
Folding
Off
Save
63