Replacing Waste Toner Bottle A - Fuji Xerox 1015S Series Instruction Manual

When the waste toner bottle is full, the message below will be displayed.
When the message is displayed, replace the waste toner bottle. If you continue to do copying without replacing
the waste toner bottle, you can make another 2,100 copies before the machine stops. The number of copies
allowed, however, may differ according to the document used.
Never throw toner or a used waste toner bottle into a fire. It might explode and you can get
burnt.
Contact your Customer Support Center for proper disposal of the used waste toner bottle.
If you use toner cartridge, waste toner bottle or staple cartridge that is not recommended by us, the machine may
not be able to realize its best quality and performance. Therefore, always use the recommended products.
The used toner may spill over when replacing the waste toner bottle. It is recommended to spread some paper under the
machine before proceeding.
Check Waste Toner Bottle
Replacing Waste Toner
10.4
Bottle A
The Waste Toner Bottle [A] is full.
Replace the bottle.
See the box for replacement instructions.
To cancel the job, press C button.
Procedure
1
Check that the machine
has stopped and then
open the front door.
383