Loading Paper - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Paper and Other Media

Loading Paper

This section describes how to load paper.
Types of paper loaded in trays
The machine automatically detects the size and orientation of loaded paper in a tray, but
not a paper type. Normally, each tray is set to plain paper. When loading paper other than
plain paper, you must change the paper type setting. You can name paper types and can
set up to five paper types as user-defined paper.
Reference
Automatic Tray Selection
If you set paper source on the [Paper/Output] tab to [Paper Tray] in the PCL print driver's
2
screen when printing, the machine automatically selects the paper tray according to the
size and orientation of the document to be printed. This is called [Automatic Tray
Selection].
When copying, selecting [Auto Select] for [Paper Supply] enables automatic tray selection.
If the machine detects two or more corresponding trays for the automatic tray selection,
the machine selects the tray with the highest priority specified in [Paper Type Priority]
among the trays set under [Paper Type Settings]. Trays whose [Paper Type Priority] setting
is set to [Auto Paper Off] are ignored in automatic tray selection. Also, if the [Paper Type
Priority] settings are identical, the tray priority is determined by [Paper Tray Priority].
Note
Reference
Adding paper
When the machine runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the message instructions. Copying or printing
automatically resumes when paper is added.
Note
58
For information on changing the paper type settings, refer to "Changing the Paper Settings" (P.64).
Some trays may not be selected in automatic tray selection depending on the setting of that tray for [Auto
Paper Select]. For more information, refer to ""Change Settings" (P.138).
Tray 5 cannot be selected in automatic tray selection.
When the paper runs out during copying or printing, select a tray containing the same sized paper and
orientation, and the machine continues copying or printing (Auto Tray Switching feature). The machine
cannot switch to a tray containing a paper type for which [Paper Type Priority] is set to [Auto Paper Off].
For information about [Paper Type], [Paper Type Priority], and [Paper Tray Priority] settings, and the paper substitute feature, refer
to "Paper Tray Settings" (P.138). You can also set these settings from CentreWare Internet Services.
Fan the paper well before loading paper in a tray. It prevents paper from sticking to each other and reduces
paper jams.