Fuji Xerox 1015S Series Instruction Manual page 339

Using the Auditron Administrator Mode
To make use of the Auditron Administrator Mode features, firstly, you will need to specify settings for
the account (by department/user), like user password and copy limit, on Create/Modify Accounts
from Auditron Administrator Mode, and secondly, enable the mode from Auditron Setup.
"8.5.2 Create/Modify Accounts"
"8.5.4 Auditron Setup"
You will also need to enter a password to enter the Auditron Administration mode.
"8.1.3 Entering/Exiting Auditron Mode"
Auditron Functions
Check Accounts
You can check the password assigned to each account, copy limit, and the current number of copies here.
"8.5.1 Review Accounts"
Create/Modify Accounts
You can specify password to an account (by department/user) and modify its copy limit here. Also, you can
reset the copy volume of each account to zero.
"8.5.2 Create/Modify Accounts"
Delete/Reset Account Data
You can delete the current copy volume, password and copy limit of each account all at the same time here.
The copy volume will be reset to zero and the other data will return to their default values.
Also, you can delete the copy volume and copy limit all at the same time.
"8.5.3 Reset Account Data"
Auditron Setup
Auditron Mode
You can specify to switch on or off the Auditron Mode here. If the Auditron Mode is switched on, the
Auditron functions will be activated. The Password Entry screen will appear when the power of the machine
is switched on or after the Auditron Administrator Mode or Meter Check screen is displayed.
"8.5.4 Auditron Setup"
User Password Entry Screen Timer
You can set the time for the Password Entry screen to be displayed after the last copy job is done.
"8.5.4 Auditron Setup"
Auditron Administrator Password
You can change the password for accessing the Auditron Administrator Mode here. You can set a password
of 4 to 12 characters.
"8.5.5 Change of Password"
8.4 Overview of Auditron Mode
313