Table of Contents
Advertisement
2.2 Loading Paper/Changing Paper Size of Paper Trays
When B5 portrait has been changed
to A4 portrait or 8.5 × 11" portrait,
remove the horizontal guide and fix
it on the right side of the tray with the
screw.
The bottom plate is raised
automatically and for up to 17
seconds, the following message will
be displayed in the control panel:
"Add Paper".
32
(3)Insert the guide into the
slot
of
the
paper size and tighten
the screw.
(4)When the paper size is
changed to B5 portrait,
remove the horizontal
guide on the right side
of the tray by loosening
the screw.
(5)Insert the guide to the
B5 slot and then tighten
the screw.
(6)Paste the appropriate
paper size label on the
tray.
3
Push in the tray slowly
until it stops.
When pushing in the tray, do not
touch the inner sides of the tray
as
your
fingers
might
pinched.
desired
be
Advertisement
Table of Contents
Troubleshooting
