Fuji Xerox 1015S Series Instruction Manual page 99

When 2 -> 1 Sided is selected,
specify in Originals, how the two
sides of the 2-sided document are
printed.
• Select Head to Head for
documents with both sides printed
in the same direction.
• Select Head to Toe for documents
with the two sides printed in
opposite direction.
"5.14 Specifying Image Orientation"
To cancel any setting, select Cancel.
When More is selected:
(1)Select 1 -> 2 Sided.
(2)Specify Copies.
2-Sided
1 -> 1 Sided
1 -> 2 Sided
2 -> 2 Sided
2 -> 1 Sided
(3)Check Original Orientation.
Confirm the documents are loaded in the direction as specified in Original
Orientation.
Head to Top:
(4)Select Save to specify settings for other features if
necessary.
3
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
5.1 1-Sided/2-Sided Copying
Cancel
Original Orientation
Copies
Head to Head to
Head
Toe
Head to Left:
Save
Head to Top
Head to Left
73