Originals/Copies Orientation (With Covers) - Fuji Xerox 1015S Series Instruction Manual

Originals/Copies Orientation
C
(With Covers)
This section explains the orientation of the documents and copies when copying with covers:
The following table indicates that Normal/HeavyWt-1 is selected for tray 5 (bypass).
Without stapling
Document setting
Copies result
Orientation
*1
on DADF
*1: Displays condition when front cover is added for Copies result with stapling setting.
*2: Displays document orientation when using DADF only. When using document glass, set as follows:
Head to Top
*3: For information on document orientation, refer to "5.14 Specifying Image Orientation".
*4: For information on output orientation, refer to "5.24 Outputting Face Up/Down".
Original Output
orientatio orientatio
*2
*3 *4
n n
Face Up
Head to
Top
Head to
Copies
Left are output
facing up.
Face
Head to
Down
Top
Head to
Copies
Left
are output
facing
down.
Head to Left
Copy paper setting
Tray 7 not
Tray 7 selected
selected
Tray 5 Tray 5 Tay 7
411