Fuji Xerox 1015S Series Instruction Manual page 132

5.10 Erasing Edges
"5.14 Specifying Image Orientation"
106
(3)Select Top and Bottom again to save the setting.
When Independent Variable Erase is selected:
You can specify different values for the top, bottom, left, and right edges.
(1)Select the item for which you want to specify the width of
the Edge Erase.
Top Edge is selected as an example:
Edge Erase
Normal
Variable Erase
Independent
Variable Erase
(2)Using the keypad, enter the value for the Edge Erase.
(3)Select Top Edge again to save the setting.
4
Check Original Orientation.
Confirm the documents are loaded in the direction as specified in Original
Orientation.
Head to Top:
5
Select Save to specify settings for other features if necessary.
6
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
Cancel
Original Orientation
Erase Value
Head to Top
(0.0-2.0)
Top Edge
"
0.1
(0.0-2.0)
Head to Left
Bottom
"
0.1
Edge
(0.0-2.0)
Left Edge
"
0.1
(0.0-2.0)
Right
"
0.1
Edge
(0.0-2.0)
Binding
"
0.0 Erase
Head to Left:
Save