Fuji Xerox 1015S Series Instruction Manual page 56

2.2 Loading Paper/Changing Paper Size of Paper Trays
For details on selecting paper size,
refer to "5.3 Selecting Paper Tray".
Shift the paper guide if you are
copying onto the following paper
sizes: SRA3 (320 × 450mm/12.6 × 17.7")
of A/B Series Size; 12 × 18" of Inch
Size. For details on shifting the
paper guide, refer to "2.2.2 Loading
Paper in Tray 5 (Bypass)".
30
5
Select A/B Series, Inch, or Non-standard as the paper size
type, then select the paper size.
Tray 5 (Bypass)
A/B Series
Size
Inch Size
Non-standard
Size
6
Specify the paper type by selecting Paper Type.
7
Specify settings for other features if necessary, and then start
copying.
8
After copying, shift the paper guide to the Standard position by
following Steps 2 to 4.
9
Move tray 5 (bypass) back
to its original position after
copying.
Remove any paper still remaining
in tray 5 (bypass).
If you have pulled
extension flap, push it back to its
original position and close the
tray.
A3 B5
B4 A5
A4 Postcard
A4 P SRA3
out the
Cancel Save
Paper Type
Plain/Heavywt 1
(64-128g/m2)
Heavywt 2
(163-220g/m2)
Transp./Heavywt 1
(129-162g/m2)
Labels
Tab Heavywt 1
(64-128g/m2)
Tab Heavywt 2
(129-162g/m2)