Fuji Xerox 1015S Series Instruction Manual page 390

Table of Contents

Advertisement

9.2 Clearing Paper Jams
Paper jam at booklet output tray
The following message will be displayed if paper is jammed at booklet output tray of the finisher.
Follow the instructions below to clear the jammed paper.
If the front door is not closed
completely, an error message is
displayed and the machine will not
start.
364
Paper Jam
1.
2.
R19
3.
Procedure
1
Open the right door of the
finisher.
2
Turn knob R19 to the right
to remove the jammed
paper
output tray.
3
If the paper is torn, check that no torn pieces are left in the
machine.
4
Close the right door of the finisher.
Open Finisher right door.
Turn Knob R19 clockwise and remove
all paper from the Booklet Output Tray.
Close Finisher right door.
at
the
booklet

Advertisement

Table of Contents
loading

Table of Contents