Fuji Xerox 1015S Series Instruction Manual page 191

If you select Tab Heavywt 1 (64-128
2
g/m ) for Paper Type, the copies
cannot be output facing up. If you
select Tab Heavywt 2 (129-162 g/
2
m ), the copies cannot be output
facing down.
"5.14 Specifying Image Orientation"
2
Select Copy to Tab or Shift All, specify the amount of
shifting, and options for Tab Stock Tray and Paper Tray.
Tab Copying
Off
Copy to Tab
Shift All
3
Load the document.
Check that the orientation of the loaded document is as shown below.
4
Load the tab paper in tray
5 (bypass).
Load the paper with the side to be
copied facing up and with the
edge opposite to the tab to be fed
first.
5
Press Start.
Copies will be made.
5.29 Copying on Tab Paper
Load your originals in Document
Feeder and tab stock in Tray 5
(Bypass).
Enter the Shift Value to shift the
image of the document onto the
tab for copying.
(0.1-0.6)
"
0.0
Cancel Save
Tab Stock Size
A4 P
8.5x11" P
Paper Type
Tab Heavywt 1
(64-128g/m2 )
Tab Heavywt 2
(129-162g/m2 )
165