Fuji Xerox 1015S Series Instruction Manual page 325

Auto Tray Switching (ATS)
This feature allows you to specify whether to automatically switch to another tray that contains paper of the same
size, orientation and type (Plain paper only) to continue copying once paper in the selected tray has run out.
Item
Tray 1 Select the ATS setting for each of the tray. Selecting
Disable for a tray will disable the ATS feature for that
Tray 2
tray. You will find it convenient to disable the ATS
Tray 3
feature for trays that you do not use frequently, like
those for loading heavy weight paper or color paper.
Tray 4
For trays selected with Enable, you cannot select
Tray 6 (HCF)
Heavyweight 1 for their paper type settings.
ATS is not available for tray 5 (bypass).
Tray 6 (HCF) is an optional product.
Auto Tray Once Enable is selected for this item, the ATS feature
Switching will be applicable to trays that are selected with
Enable.
If Enabled during Auto Paper is selected, the ATS
feature will only be applicable if Auto is selected
Paper Supply. If you have selected a specific tray and
the paper runs out during copying, the tray will not be
switched to another tray. Once Disable is selected for
this item, the ATS feature will not be applicable to
trays that are selected with Enable.
If more than one tray is enabled for this ATS feature, the order in
which they will be switched is as follows: tray 6 (HCF), tray 1, tray 2,
tray 3 and tray 4.
Tray 6 (HCF) is an optional product.
Audio tones
You can set the volume of audio tones, like those which notify you of a completed copy job or a
machine fault.
The volume of the options for the audio tones, Soft, Normal, Loud, can be adjusted by the volume adjustment dial on the main
control panel. For details, refer to "1.3 Using the Touch Panel Display".
Item
Control Panel Specify the tone when you have selected a button on
Select Tone the display correctly.
Control Panel Specify the tone when you make an error in operation.
Alert Tone
Hard Keypad Specify the tone when you press any button on the
Input Tone control panel.
Machine Ready Specify the tone when the machine is ready to copy
Tone after the power has been switched on.
Copy Job Specify the tone when a copy job is completed without
Complete Tone error.
Alert Tone Specify the tone when a fault is detected, like a
document or paper jam.
Description
Description
8.2 Overview of Tools Mode
Options
Enable, Disable
Enable
Enabled during Auto Paper*
Disable
* indicates the factory setting.
Available options
Off, Soft, Normal*, Loud
Off, Soft, Normal*, Loud
Off*, On
Off, Soft, Normal*, Loud
Off, Soft, Normal*, Loud
Off, Soft, Normal*, Loud
* indicates the factory setting.
299