Obtaining The Printer Ip Address From The Configuration Report; Installation And Setup; Installation And Setup Overview; Selecting A Location For The Printer - Xerox VersaLink C505S User Manual

4. To return to the Home screen, press the Home button.

Obtaining the Printer IP Address from the Configuration Report

To obtain the printer IP address from the Configuration Report:
1. At the printer control panel, press the Home button.
2. Touch Device > About > Information Pages.
3. Touch Configuration Report.
The IP address appears in the Connectivity section of the Configuration Report for
IPv4 or IPv6.
4. To return to the Home screen, press the Home button.

Installation and Setup

For reference:
• Installation Guide packaged with your printer
• Online Support Assistant at

Installation and Setup Overview

Before you print, ensure that your computer and the printer are plugged in, powered on,
and connected. Configure the initial settings of the printer, then install the print driver
software and utilities on your computer.
You can connect to your printer directly from your computer using USB, or connect to
a network using an Ethernet cable or wireless connection. Hardware and cabling
requirements vary for the different connection methods. Routers, network hubs and
switches, modems, Ethernet cables, and USB cables are not included with your printer
and must be purchased separately. Xerox recommends an Ethernet connection because
it is typically faster than a USB connection, and it provides access to the Embedded Web
Server.
For more information, refer to the System Administrator Guide at
www.xerox.com/office/VLC505docs.

Selecting a Location for the Printer

1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative
humidity 10–85%.
Note
Sudden temperature fluctuations can affect print quality. Rapid heating of a cold
room can cause condensation inside the printer, directly interfering with image
transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength to
hold the weight of the printer. The printer must be horizontal with all four feet in
solid contact with the surface.
To find the weight for your printer configuration, refer to
® ®
Xerox VersaLink C505 Multifunction Printer
User Guide
www.xerox.com/office/VLC505support
Getting Started
Weights and Dimensions.
2-11