How To Submit A Print Job; Setup And Submit The Print Job - Xerox Versant 80 Press User Manual

How to Submit a Print Job

Setup and Submit the Print Job

The following is a basic workflow for setting up a job and submitting it from the print
server:
1. At the press, load the appropriate paper to be used for the job.
2. From the press UI, ensue that the Paper Tray settings/Tray Properties window
matches the stock properties for the paper you will use, and that it assigned to the
same feeder tray where the paper is loaded.
3. At the print server main window, customize your job such as inserting special pages
and tabs, and create your print queue that defines the attributes of those jobs sent
to the queue.
4. Submit the job file from the print server to the networked press for printing.

How to Submit a Print Job

There are several ways in which to submit your job for printing:
• From your computer workstation (PC or Mac), using print drivers such as PostScript
and Printer Command Language (PCL), you can submit a document file to the print
server queue. From the print server, you would then submit the job to the press.
Note
Make sure the appropriate print drivers have been installed on your computer. Refer
to your print driver documentation or the Xerox web site for more information on
how to download or install print drivers.
• At any remote workstation, using a Hot Folders application to submit the document
file to the print server.
® ®
Xerox Versant 80 Press
User Guide
12
12-1