X Bus Transfer Error Status And Control Register 2 (Tescr2) - Motorola MPC8260 PowerQUICC II User Manual

Part II. ConÞguration and Reset
Table 4-15. TESCR1 Field Descriptions (Continued)
Bits Name
6 EXT External error. Indicates that TEA was asserted by an external bus slave.
7Ð9 TC Transfer code. Indicates the transfer code of the 60x bus transaction that caused the TEA. See
Section 8.4.3.2, ÒTransfer Code Signals TC[0Ð2],Ó for a description of the various transfer codes.
10 Ñ Reserved, should be cleared.
11Ð15 TT Transfer type. These bits indicates the transfer type of the 60x bus transaction that caused the TEA.
See Section 8.4.3.1, ÒTransfer Type Signal (TT[0Ð4]) Encoding,Ó for a description of the various
transfer types.
16 Ñ Reserved, should be cleared.
17 DMD Data errors disable.
0 Errors are enabled.
1 All data errors (parity and single and double ECC errors) on the 60x bus are disabled.
18Ð23 Ñ Reserved, should be cleared.
24Ð31 ECNT Single ECC error counter.Indicates the number of single ECC errors that occurred in the system.
When the counter reaches its maximum value (255), TEA is asserted for all single ECC errors. This
feature gives the system the ability to withstand a few random errors yet react to a catastrophic failure.
The user can set a lower threshold to the number of tolerated single ECC errors by writing some value
to ECNT. The counter starts from this value instead of zero.
4.3.2.11 60x Bus Transfer Error Status and Control Register 2
(TESCR2)
The 60x bus transfer error status and control register 2 (TESCR2) is shown in Figure 4-32.
Bits 0 1
Field Ñ REGS DPR
Reset
R/W
Addr
Bits 16 17 18
Field
Reset
R/W
Addr
Figure 4-32. 60x Bus Transfer Error Status and Control Register 2 (TESCR2)
4-37
2 3 4 5
Ñ
0000_0000_0000_0000
19 20 21 22
BNK
0000_0000_0000_0000
MPC8260 PowerQUICC II UserÕs Manual
Description
6 7 8 9 10
LCL
R/W
0x10044
23 24 25 26
R/W
0x10046
11 12 13 14
PB
27 28 29 30
Ñ
MOTOROLA
15
31