Opening And Closing The Server; Removing/Mounting The Doors - Fujitsu PRIMERGY H250 Manual

5

Opening and Closing the Server

V
CAUTION!
Observe the section "Notes on Safety" on page 7 and the chapter "Instal-
lation" on page 17 and "System Components and Expansions" on
page 71, when connecting or disconnecting cables.
5.1

Removing/Mounting the Doors

Ê Unlock the server (see section "Unlocking the Floorstand Model" on
page 45).
Ê Remove the key.
Figure 25: Removing the doors
Ê Lift the open doors slightly (1), and remove them forwards (2).
Mounting is performed in the reverse order (see alsosection "Mounting the
Doors" on page 20).
U41271-J-Z156-2-76
57