9
Completion
V
CAUTION!
Please observe the safety information in the chapter "Notes on Safety"
on
page
13ff.
9.1
Closing the Server Blade
Figure 35: Closing the server blade
Ê Place the cover of the server blade on the housing at a distance of 1-2 cm
from the frame, such that the cover lies flush with the edges on both sides.
Ê Push the cover forward in the direction of the arrow (1) until it engages.
Ê Insert the server blade in the basic unit.
I
To insert the server blade, follow the procedure described in the
section
in reverse.
BX620 S4
"Removing the Server Blade from the Basic Unit" on page
Options Guide
17f
53