Table A.44 Setting Items Of [Security Configuration] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Appendix A List of Setting Items
A.2
Setting Item
Mass Storage
Devices:
USB Port
disable(*1)
*1: As settings of Physical Partition remain same in Extended Partitioning, settings are only displayed but
cannot be changed.
A.2.7 Setting Items on [Security Configuration] Window
Following table lists the initial value and the values that can be set for Setting Items on [Security
Configuration] window.
In Extended Partitioning, because TPM cannot be used, this menu is not displayed.
Setting Item
TPM Support
TPM State
Pending TPM
operation
Setting Items on UEFI
Initial Value
Auto
Enabled

TABLE A.44 Setting Items of [Security Configuration] Window

Initial Value
Disabled
Disabled
None
Setting value
 Auto
 Floppy
 Forced FDD
 Hard Disk
 CD-ROM
 Enable
 Disable
Setting Value
 Disabled
 Enabled
 Disabled
 Enabled
 None
 Enable Take Ownership
 Disable Take Ownership
 TPM Clear
730
Remarks
Remarks
CA92344-0539-04