Table 1.48 Buttons On [Du#X] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.2 [System] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E
Items
Threshold
Button
Status Clear Clears the error message of the disk unit
When the [Status Clear] button is clicked, the error status of the disk unit will be cleared and it can be
specified so that the disk unit can be used again at the time of the next reboot. When an error is detected
again at the time of re-boot, the error status of the disk unit would be recorded again.
(1) Menu Operation
[System] – [DU] – [DU#x]
(2) Window Operations
1. Click the [Status Clear] button.
A confirmation dialogue box is displayed.
2. Click the [OK] button to clear the error message and click the [Cancel] when you do not want to clear
the error status of the disk unit.
[Message]
This section describes the messages to be displayed on this window.
Message Number
I_00029 Status Clear completed.
E_00123 Failed to clear the status.
For details on the messages displayed on the window, see
(CA92344-0540).
Warning Lower and upper limits of the warning-level voltage.
(Low/High)
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.
Critical Lower and upper limits of the critical-level voltage.
(Low/High)
Displays " – ", when the threshold is not set.
Displays the power voltage in the last two decimal places.

TABLE 1.48 Buttons on [DU#x] Window

Message
128
Description
Description
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04