Fujitsu PRIMEQUEST 2000 Series Tool Reference page 322
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB Web-UI (Web User Interface) Operations
1.7 [System] Menu for PRIMEQUEST 2800B2/2800B
Items
TPM
(current status)
TPM
(ownership)
IOU
On board LAN Mode
(current status)
On board LAN Mode
(setting)
(1)
Menu Operation
[System] - [Mode]
(2)
Window Operations
1.
Specify respective Mode and click the [Apply] button.
Confirmation dialog box is displayed.
2.
Click the [Ok] button.
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00089
Mode setting failed.
E_00090
Power Control [Reset] setting failed.
E_00xxx
Unable to register the system as Mode enable because the DIMM does not satisfy
requirements of Mode.
W_00xxx
Unable to change the mode, because the system is powered on.
E_00xxx
Unable to register the system as Mode enable because the CPU mismatch between
SBs.
E_00xxx
Unable to register the system as Mode enable because the unsupported CPU
configuration.
E_00xxx
Unable to register the system as Mode enable because of abnormal CPU
composition.
E_00xxx
Unable to register the system as Mode enable because of abnormal DIMM
composition.
E_00xxx
Unable to register the system as Mode enable because of abnormal SB composition.
For details on the messages displayed on the window, see
(CA92344-0540).
Displays the TPM status.
Activated
Deactivated
Remarks
When Home SB is 'without TPM mode', this field is not displayed.
Displays ownership of TPM.
Yes (having Ownership)
No (not having Ownership)
Remarks
When Home SB is without TPM mode, this field is not displayed.
Displays the IOU that belongs to the system.
Displays the On board LAN Mode in IOU Unit.
Enabled (WOL enabled): Onboard LAN can be used at AC On status.
Enabled (WOL disabled): Onboard LAN comprised in the system can be
used at Power On status.
Disabled: Onboard LAN cannot be used every time.
Sets On board LAN Device Mode in IOU Unit.
Select the Mode to be set by using the radio button.
Enabled(WOL enabled)
Enabled(WOL disabled)
Disabled
Default setting is Enabled (WOL disabled).
321
Description
Message
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04
Advertisement
Table of Contents
