Set Partition Dimm_Excl_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.38 set partition dimm_excl_mode

It sets the DIMM exclusive allocation mode of the specified Extended Partitioning.
Default value set is disable.
enable: DIMM exclusive allocation mode is valid
disable: DIMM exclusive allocation mode is invalid
For the partition which is already powered on, when the settings are performed by this command, following
message is displayed and settings cannot be performed.
"Unable to change the mode while the partition is running.
Please try to change the mode after the partition is shutdown."
For the partition which is already powered off, when the settings are changed by this command, power off/on
is not required. The value which is set is reflected instantly instead of displaying the above-mentioned
message.
Moreover, also if a values which are the same as the current values are set, power off/on is not required,
and the above-mentioned message is not displayed.
When the specified partition is not in an Extended Partitioning, an error message is displayed and the
operation cannot be performed for the specified partition.

Privilege: Administrator, Operator, Partition Operator (Only managed partition)
(1) Input format
set partition dimm_excl_mode <partition#> [enable| disable ]{quiet}
(2) Option
quiet: Message is not displayed
(3) Usage example
Example: When setting DIMM exclusive allocation mode of the Partition#4 to Enable.
# set partition dimm_excl_mode 4 enable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
The specified partition number is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'set partition dimm_excl_mode' command.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to change the mode while the partition is running.
Please try to change the mode after the partition is shutdown.
Unable to execute this command because you have not authority to operate this partition.
Partition#x is not defined.
392
CA92344-0539-04