Figure 3.71 [Boot From Dvd/Cd] Message; Boot From Dvd/Cd] Menu - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
UEFI Menu Operations
3.5 [Boot maintenance Manager] Menu
3.5.4 [Boot From DVD/CD] Menu
When this menu is selected, it operates as follows.
It starts from the medium inserted in DVD/CD Drive connected with the system. At this time, it does not
start from Hard Disk Drive and Net Drive connected with the system.
This menu is for the start of the medium for maintenance.
When DVD/CD Drive is not connected or the medium has not been inserted, the following messages
are displayed.
It is started from the medium of DVD/CD Drive again by connecting DVD/CD Drive while displaying the
above-mentioned message, inserting the medium, and inputting the key.
FIGURE 3.71 [Boot From DVD/CD] Message
652
CA92344-0539-04
Advertisement
Table of Contents
