Set Partition Lan_Device_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.26 set partition lan_device_mode

LAN Device Mode is set by the IOU unit in the specified partition.
Default value set is wol_disable.
wol_enable: Onboard LAN enabled with AC On.
wol_disable: Onboard LAN enabled with Partition On.
device_disable: Onboard LAN device disabled always.
For the partition which is already powered ON, when the settings are performed by this command, following
message is displayed and settings cannot be performed.
"Unable to change the mode while the partition is running.
Please try to change the mode after the partition is shutdown."
For the partition which is already powered OFF, when the settings are changed by this command, power
OFF/ON is not required. The value which is set is reflected instantly instead of displaying the above-
mentioned message.
Moreover, also when values which are the same as the current values are set, power off/on is not required
and the above-mentioned message is not displayed.
When the specified partition is an Extended Partitioning, an error message is displayed, and the specified
partition cannot be operated.

Privilege: Administrator, Operator, Partition Operator (Only managed partition)
(1) Input format
set partition lan_device_mode <partition#> <IOU#> [wol_enable|
(2) Option
quiet: The command is executed without interactive operation to User.
(3) Usage example
Example: When setting IOU#2 to Enable (WOL enabled) in the Partition3
# set partition lan_device_mode 3 2 enable_wol_enable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The setting will become effective the next time the partition power off/on is performed.
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute %s command.
Failed to execute set partition command.
Unable to change the mode while the partition is running.
Please try to change the mode after the partition is shutdown.
Unable to execute this command because you have not authority to operate this partition.
381
CA92344-0539-04