Set Memory_Operation_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.6 PRIMEQUEST 2800B2/2800B model Commands

2.6.6 set memory_operation_mode

It sets the Memory Operation Mode of the system.
By default normal (Mode invalid) is set.
performance : sets the Performance Mode
normal
partial_mirror : sets the Partial Mode
full_mirror
spare
For the system which is already powered ON, when the settings are performed by this command, following
message is displayed and settings cannot be performed.
"Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown."
For the system which is already powered OFF, when the settings are changed by this command, power
OFF/ON is not required. The value which is set is reflected instantly instead of displaying the above-
mentioned message.
Moreover, also when the values which are the same as the current values are set, power off/on is not
required and the above-mentioned message is not displayed.

Privilege: Administrator, Operator
(1) Input format
set memory_operation_mode [performance |normal | partial_mirror | full_mirror |
spare] {quiet}
(2) Option
quiet: The command is executed without interactive operation to User.
(3) Usage example
Example: When setting Memory Operation Mode of the system to performance
# set memory_operation_mode performance
The setting will become effective the next time the system power off/on is performed
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The setting will become effective the next time the system power off/on is performed.
The specified parameter is invalid.
Unable to register the System as Mode enable because the CPU mismatch between SBs.
Unable to register the System as Mode enable because the DIMM does not satisfy requirements of Mode.
Unable to register the System as Mode enable because the unsupported CPU configuration.
Unable to register the System as Mode enable because of abnormal CPU composition.
Unable to register the System as Mode enable because of abnormal DIMM composition.
Unable to register the System as Mode enable because of abnormal SB composition.
Failed to execute %s command.
Failed to execute set memory_operation_mode command.
Unable to change the mode while the system is running.
Please try to change the mode after the system is shutdown.
Unable to execute this command because you have not authority to operate this system.
System Configuration Failed.
: sets the Normal Mode
: sets the Full Mode
: sets the Spare Mode
501
CA92344-0539-04