Table 2.12 Mmb Cli Commands (Ce) - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.6 PRIMEQUEST 2800B2/2800B model Commands
Command
Power control
power off
power on
Partition creation
add partition
remove partition
show partition configuration
set reserved_sb
show reserved_sb
set partition home
show partition home
set partition dynamic_reconfiguration
show partition dynamic_reconfiguration
set memory_operation_mode
show memory_operation_mode
set memory_mirror_ras_mode
show memory_mirror_ras_mode
set pci_address_mode
show pci_address_mode
set lan_device_mode
show lan_device_mode
set pci_express_mode
show pci_express_mode
set partition name
show partition name
hotadd partition
hotremove partition
show system_power status
set memory_sparing_mode
show memory_sparing_mode
Partition control
sadump
reset
nmi
Partition connection
console
DR-related
Extended Partitioning-related
MMB configuration and other
set active_mmb
show active_mmb
help
System configuration
set mmb control reset

TABLE 2.12 MMB CLI commands (CE)

CE
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
495
- Turns the power off.
- Turns the power on.
- Adds a partition component.
- Removes a partition component.
- Displays the partition configuration.
- Sets the Reserved SB.
- Displays the Reserved SB.
- Sets the Home SB.
- Displays the Home SB.
- Sets DR state of partition.
- Displays DR state of partition.
- Sets Memory operation mode.
Displays Memory operation mode.
- Sets Memory operation at Mode.
Displays Memory operation at Mode.
- Sets PCI bus number allocation mod.
- Displays PCI bus number allocation mod.
- Sets LAN device mode.
Displays LAN device mode.
- Sets PCI-express mode.
- Displays PCI-express mode.
- Sets the partition name.
- Displays the partition name.
- Dynamic Reconfiguration HotAdd
- Dynamic Reconfiguration HotRemove
Displays System Power status.
Sets the memory operation at spare mode.
Displays the memory operation at spare mode.
- sadump instruction
- Hard Reset instruction
- NMI interrupt instruction
- Text Console connection to partition
- DR related commands
- Extended Partitioning related commands
- Sets the active MMB.
- Displays the active MMB.
Help information
- Resets the MMB.
Outline
CA92344-0539-04