MMB CLI (Command Line Interface) Operations
2.2 Setting Commands
2.2.46 hotadd partition
The specified SB or IOU is dynamically added for the specified partition.
A few minutes are required for the execution of this command.
The SB parameter specifies physical SB number (It is not logical SB number).
The execution of this command cannot be interrupted.
When the partition will be started next time, the configuration change is reflected even if the command
fails.
Privilege: Administrator
(1)
Input format
hotadd partition <partition#> SB <SB#x> {quiet}
hotadd partition <partition#> IOU <IOU#x> {quiet}
(2)
Option
quiet: The command is executed without interacting with the user.
(3)
Usage example
Example: When SB#3 is to be added to Partition#2
# hotadd partition 2 SB 3
Are you sure to continue adding SB#3 to partition#2? [Y/N] Y
DR operation start (1/5)
Assigning SB#3 to partition#2 (2/5)
Testing SB#3 (3/5)
Reconfiguring partition#2 (4/5)
Onlining added Memory/CPU (5/5)
Adding SB#3 to Partition#2 has been completed successfully.
#
Example: When IOU#3 is to be added to Partition#2
# hotadd partition 2 IOU 3
Are you sure to continue adding IOU#3 to Partition#2? [Y/N] Y
DR operation start (1/3)
Assigning IOU#$ to partition#$ (2/3)
Power on IOU#$(3/3)
Adding IOU#3 to Partition#2 has been completed successfully.
#
402
CA92344-0539-04