Fujitsu PRIMEQUEST 2000 Series Tool Reference page 469

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display
(3) Usage example

Example: When the partition configuration information of Partition 4~5 is displayed in PRIMEQUEST
2800E
# show extended_partition configuration 4-5
4 Web front 1
5 Web front 2
#
 Example: When 'all' specification is used for the configuration same as above
# show extended_partition configuration all
4 Web front 1
5 Web front 2
6 <Blank display since nothing is registered>
7 <Blank display since nothing is registered>
8 <Blank display since nothing is registered>
9 <Blank display since nothing is registered>
10 <Blank display since nothing is registered>
11 <Blank display since nothing is registered>
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
The specified partition number is invalid.
The specified parameter is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'show partition extended_partition configuration' command.
Partition#x is not defined.
8CPU 512GB
PCISLOT(SB#1 IOU#1{1} PCIBOX#0{1 4})
6CPU 1024GB
PCISLOT(IOU#1{3} PCIBOX#0{0 3} )
8CPU 512GB
PCISLOT(SB#1 IOU#1{1} PCIBOX#0{1 4})
6CPU 1024GB
PCISLOT(IOU#1{3} PCIBOX#0{0 3} )
468
USB1 GbE(IOU#1)
VGA/USB2 DU(IOU#1)
USB1 GbE(IOU#1)
VGA/USB2 DU(IOU#1)
CA92344-0539-04