Show Partition Extended_Partitioning_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display

2.3.38 show partition extended_partitioning_mode

Displays the setting (enable/disable) of Extended Partitioning Mode of the specified partition.
When the specified partition is an Extended Partitioning, an error message displays and the specified
partition cannot be operated.

Privilege: Aｌｌ
(1) Input format
show partition extended_partitioning_mode <partition#>
(2) Option
None
(3) Usage example

Example: When Extended Partitioning mode of Partition#1 is displayed,
# show partition extended_partitioning_mode 1
Partition#1: Extended Partitioning Mode: enable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
The specified partition number is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'show partition extended_partitioning_mode' command.
Partition#x is not defined.
464
CA92344-0539-04