Fujitsu PRIMEQUEST 2000 Series Tool Reference page 303
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB Web-UI (Web User Interface) Operations
1.7 [System] Menu for PRIMEQUEST 2800B2/2800B
Remarks
When the operating system supports the ACPI, the operating system can be shutdown by the above
mentioned Power Off operation and the power can be turned off. When the operating system is not
supported by the ACPI, the power is turned off without shutting down the operating system. Moreover, when
the application which is operating in the operating system is not supported even if the operating system is
supported by the ACPI, the power cannot be turned off. Since this is according to the operating system and
application specifications, for details, see the Operating System and Application Manual.
(1)
Menu Operation
[System] – [Power Control]
(2)
Window Operations
1.
Click the [Status Clear] button. Selects the power control items related to each partition from the pull-
down list of [Power Control]. Then click the [Apply] button.
Dialog box for setting confirmation appears.
2.
Click [OK] button to execute the settings.
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00141
Unable to power on the System.
E_00142
Unable to power off the System.
E_00002
Command Failed
E_00144
Unable to power off/on the System.
E_00145
Unable to reset the System.
E_00146
Unable to generate an NMI interrupt in the System.
E_00143
Unable to forcibly power off the System.
E_00091
Force Power Off Delay setting failed.
E_00xxx
Unable to power on the system due to CPU mismatch between SBs.
E_00154
Unable to power on due to mismatch between supply voltage and input voltage.
I_00151
Unable to control system power because maintenance is in progress.
Release maintenance mode first.
E_00xxx
Unable to power on the system due to CPU composition abnormal.
E_00xxx
Unable to power on the system due to DIMM composition abnormal.
E_00xxx
Unable to power on the system due to DIMM does not satisfy requirements of Mode.
W_00504
The Power On failed, because of switching the Home SB.
Please execute it after a while again.
E_00xxx
Unable to power on the system due to abnormal SB composition.
For details on the messages displayed on the window, see
(CA92344-0540).
Message
PRIMEQUEST 2000 Series Message Reference
302
CA92344-0539-04
Advertisement
Table of Contents
