MMB CLI (Command Line Interface) Operations
2.3 Commands for Display
2.3.1 show access_control
Setting value of current access control is displayed.
Privilege: Administrator
(1)
Input format
show access_control
(2)
Option
None
(3)
Usage example
# Administrator> show access_control
SSH: All
Telnet:All
HTTP:
HTTPS:IP Address: 10.66.250.190: Netmask:24
SNMP: All
#
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified command is invalid
2.3.2 show active_mmb
Displays current Active MMB.
Privilege: All
(1)
Input format
show active_mmb
(2)
Option
None
(3)
Usage example
#show active_mmb
SSH: Al Active MMB: 1l
#
(4)
Message
None
436
CA92344-0539-04