Table 1.149 [Power Control] Window Buttons - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.7 [System] Menu for PRIMEQUEST 2800B2/2800B
Items
Power Control
Force Power Off Delay
Boot Selector

TABLE 1.149 [Power Control] Window Buttons

Buttons
Apply When you click the [Apply] button, the information of power control items is set.
Confirm the setting contents if dialog box prompts for Confirmation.
Cancel When you click the [Cancel] button, returns to source without setting the information of power
control items corresponding to partition,.
Selects power control specified for the system.
However, for the system which is already in power-on state, [Power On] is not
displayed. On the contrary, for the system which is already in powered off,
[Power Off], [Reset], [NMI], [Power Cycle], [Force Power Off] and [sadump] are
not displayed.

Power On: System is the powered on.

Power Off: System is powered off.
From the view point of Operating system, it is same as that the power
button of the device is on. Therefore, when the operating system
supports the ACPI, power can be turned off after the operating system is
shutdown. For details, see Power Specifications (ACPI) of the operating
system. When the operating system does not support the ACPI, the
power can be turned off without shutting down the operating system.

Power Cycle: Powered on again after the partition is forcibly powered on.

Reset: Resets the partition.

NMI: Produces the NMI interruption for the system.

Force Power Off: Turns off the power forcefully.

sadump: Specifies the SADUMP for the system.

(Not specified): There is no instruction for this system.
Specifies whether to enforce power off, when power off is done without proper
operation of the shutdown instruction for the operating system by [Power Off]
on the partition. In case enforced power off has been specified, the specified
time (1~9 minutes) can be set. The system is forcibly powered off when the
specified time has lapsed.
The default setting of check box is Off.
Specifies the boot device for which the Boot Manager setting of BIOS is
Override temporarily. Select the device to be boot from pull-down menu.

No Override: Boots by the EFI Boot Manager settings.

Force boot into EFI Boot Manager: Waiting for input by the EFI Boot
Manager. Boot by selecting the boot device from the EFI Boot Manager

Force PXE/iSCSI: Overrides the EFI Boot Manager settings, forcibly tries
the PXE.

Force boot from DVD: Overrides the EFI Boot Manager settings, and
forcibly tries the booting from the System DVD.
Default setting is 'No Override'.
This setting is applied only for the first system boot setting the value. After the
system boots, this setting automatically returns to 'No Override'. Therefore, it
is necessary to set the boot for system. In case of constant setting, it is set in
the Boot Manager of the UEFI.
301
Description
Description
CA92344-0539-04