Set Timezone - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.36 set timezone

Set the Timezone.
Remarks
It is necessary to reset the time by using set date command after the time zone is set.

Privilege: Administrator
(1) Input format
set timezone <timezone>
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified port number is invalid.
Time synchronization was requested to Standby MMB.
Unable to execute this command on a standby MMB.
390
CA92344-0539-04