Figure 3.41 Delete Window (1) Of Boot Option - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
UEFI Menu Operations
3.5 [Boot maintenance Manager] Menu
Boot option removal
Removal of boot option is executed according to the following procedure.
1. Place the cursor on the boot option which is to be removed.
2. Press [Space] key. As shown in "FIGURE 3.41 Delete window (1) of boot option", [ ] is changed to [X].
FIGURE 3.41 Delete window (1) of boot option
Remarks
Press [Space] key again when 'delete' is cancelled.
When "Space" key is pressed again, [] changes to [X].
3. To exit from this menu after saving the changed setting, select [Commit Changes and Exit] and press
[Enter] key.
To exit from this menu without saving the changed setting, select [Discard Changes and Exit] is and press
[Enter] key.
4. Confirm that the boot option is deleted normally by using the following procedure.
a. Open the [Boot Manager] menu from Boot Manager front page.
Menu shown in
"FIGURE 3.42 Boot Option Deletion Window
(2)" is displayed.
b. It is confirmed that the deleted boot option does not exist.
CA92344-0539-04
623
Advertisement
Table of Contents
