Set Gateway; Set Gateway_Ipv - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.15 set gateway

Default gateway is set
Set value is 0.0.0.0 by default.

Privilege: Administrator
(1) Input format
set gateway<ip address>
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified gateway address is invalid.
The specified parameter is invalid.
The specified IP address is duplicated.
The specified IP address is loopback address.
Unable to execute this command on a standby MMB.

2.2.16 set gateway_ipv6

Default gateway of IPv6 is set
If automatic setting is executed, only "auto" is specified in option.

Privilege: Administrator
(1) Input format

In case of manual setting
Set gateway_ipv6 <ip address>

In case of automatic setting
Set gateway_ipv6 auto
(2) Option
auto: IP address is set automatically.
(3) Usage example

In case of manual setting
# set gateway_ipv6 fe80::1

In case of automatic setting
#set gateway_ipv6 auto
fe80::beef
Are you sure to continue?[Y/N]
373
CA92344-0539-04