Chapter 6 Setting Of Sadump Environment - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Setting of sadump environment
6.1 Sadump Configuration Menu
CHAPTER 6 Setting of sadump environment
In this chapter, how to configure sadump is explained.
A configuration of sadump is saved to UEFI configuration information. Back up it to restore the configuration.
About backing up and restoring UEFI configuration information, refer "8.1.1 Backing up and restoring UEFI
configuration information" in "PRIMEQUEST 2000 Series Administration Manual".
6.1
Sadump Configuration Menu
To configure sadump, select main menu to set up sadump from the [Device Manager] menu. Configure
sadump by inputting values in the main menu and submenu which is shown below. The structure of menu is
as follows.
When the "PCI ROM Priority" setting of the PCI Subsystem Configuration menu is "EFI Compatible ROM",
the Sadump setting menu is displayed.
CA92344-0539-04
679
Advertisement
Table of Contents
