Table 1.83 Display Items And Set Items Of [Asr (Automatic Server Restart) Control] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Hide thumbs Also See for PRIMEQUEST 2000 Series:
Table of Contents

Advertisement

MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E

TABLE 1.83 Display Items and Set Items of [ASR (Automatic Server Restart) Control] Window

Items
ASR
Number of Restart Tries
Action after exceeding
Restart tries
Retry Counter
Boot Watchdog
Boot Watchdog
Timeout time (seconds)
Action when watchdog
expires
Software Watchdog
Software Watchdog
Timeout time (seconds)
Action when watchdog
expires
Set the number of retries for restarting the operating system when there is time
out by Boot Watchdog, or Software Watchdog of SVAS, or the hardware error
occurs and OS shuts down.
The number of times can be set up to 0-10 times. When 0 is specified, it does not
retry.
Default is five times.
Repeat the restart by Watchdog Timeout and sets the action when the above-
mentioned retry number is exceeded. The actions are as below.
Stop rebooting and Power Off: Reboot process is stopped, power supply of
partition is cut off.
Stop rebooting: Reboot process is stopped, and the partition is stopped.
Diagnostic Interrupt assert: Reboot process is stopped, instructs the NMI
interruption for partition. Tries to collect the data for investigation (damp) for
the investigating the cause of stoppage, of the partition which has stopped.
Default setting is 'Stop rebooting and Power Off'
Displays the number of actual possible retries.
Enable/disable of the Boot Watchdog function of ServerView is set.
The start of OS is observed when setting it to Enable. After OS starts, Boot
Watchdog is stopped by ServerView.
Default is Disable.
Time until Boot Watchdog does timeout is set.
The range of 1-6000 can be set.
Default is 6000 seconds (=100 minutes).
Action when Boot Watchdog does timeout is set.
In Action, there is the following.
Continue
Reset
Power Cycle
Enable/disable of the Software Watchdog function of ServerView is set.
After OS starts, the operation of OS is observed by ServerView when setting it to
Enable.
Default is Disable.
Time until Software Watchdog does timeout is set.
The range of 1-6000 can be set.
Default is 300 seconds (=5 minutes).
Action when Software Watchdog does timeout is set.
In Action, there is the following.
Continue
Reset
Power Cycle
NMI
198
Description
CA92344-0539-04

Advertisement

Table of Contents
loading

Table of Contents