Setting of sadump environment
6.10 [Select multiple devices] Menu
6.10
[Select multiple devices] Menu
This is displayed when [Create mode] is set to [Single] in the [Create a dump device] menu.
Select multiple disks for dump devices.
FIGURE 6.13 [Select discard dump device] Menu [Select multiple devices] Menu
Item
Go to create dump device
Exit
ACPI name of dump
device
Remarks
. Regarding to ACPI name which is used for disk or disk partition, refer "5.7 Device Path".
TABLE 6.18 Displayed contents of the help display area for operation
Item
↑↓=Move Highlight
<spacebar>= Toggle
checkbox
Note
[Esc] key is displayed on screen but don't operate it.
TABLE 6.17 Displayed contents of menu selection area
Go to [Confirmation] menu.
Exits this menu without actually creating any dump
device.
ACPI name of the dump device disk is displayed.
Select a dump device by [Space] key, then [] on the
right-hand of the entry is changed to [X].
Move the cursor up or down.
Select a disk.
Selected disk is marked with [X]. Operating [Space]
key once more, the selection is canceled.
Description
Description
695
CA92344-0539-04