Table 1.106 Buttons In The [Network Protocols] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu
To set HTTPS to [Enable], a valid SSL certificate must be registered.
If you set HTTPS to [Enable] when no valid SSL certificate has been registered, an error message appears.

TABLE 1.106 Buttons in the [Network Protocols] window

Buttons
Apply Sets the specified information.
Cancel Restores the original information and does not set the specified information, such as port
numbers and the time-out time.
(1) Menu Operation
[Network Configuration] - [Network Protocols]
(2) Window Operations
1. Specify the port numbers, time-out time, or other items to set as protocol information. Then, click the
[Apply] button.
This sets the specified information, such as the port numbers and time-out time.
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013 Setting completed.
E_00044 The Port number overlaps.
W_00435 Invalid Port number.
W_00436 Invalid Timeout value.
W_00437 The duplicate Port number was found.
W_00438 Timeout setting is invalid.
E_00439 SSL Server Certificate is not found.
I_00440 HTTP Connection will be lost. You will need to login again.
Are you sure?
For details on the messages displayed on the window, see
(CA92344-0540).
Description
Message
PRIMEQUEST 2000 Series Message Reference
241
CA92344-0539-04