Figure 6.9 Dump Device Select Menu; Table 6.9 Displayed Contents Of Menu Selection Area; Select Device] Menu - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Setting of sadump environment

6.6 [Select device] Menu

6.6 [Select device] Menu
This is displayed when the [Create mode] menu is set to [Single] in the [Create a dump device] menu.
Select disk or disk partition and create dump device.
Item
Exit
ACPI name of disk/disk
partition
Remarks
-Regarding to ACPI name which is used for disk or disk partition,
-To use devices of ETERNUS as dump device, setting up UEFI deriver is needed beforehand. Refer
"PRIMEQUEST 2000 Series SAN Boot Environment Configuration Manual (C122-E206EN)" for details.
Confirm again if correct disk is selected when
selecting dump device. If wrong disk is selected, the
data the disk has is corrupted.

FIGURE 6.9 Dump device select menu

TABLE 6.9 Displayed contents of menu selection area

Exits this menu
Select disk or disk partition to create dump device
(Data corruption)
Description
refer"5.7 Device Path".
689
CA92344-0539-04