Add Extended_Partition Pcibox - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.42 add extended_partition pcibox

PCI Express slot of the specified PCI_Box is added to specified Extended Partitioning.
This command is not executed when the specified Extended Partitioning is powered on.
This command is not executed when PCI Express slot of the specified PCI_Box is not free.
Nothing is executed, when the specified partition number is not Extended Partitioning.

Privilege: Administrator
(1) Input format
add extended_partition pcibox <PCIBOX#> <partition#> PCISLOT<PCI Slot#> {quiet}
(2) Option
quiet: This command is executed without interactive operations for user.
(3) Usage example

Example: When PCI Express slot of PCI_Box#1 is to be added to Partition#4 in PRIMEQUEST2800E
# add extended_partition pcibox 1 4 PCISLOT 2
Are you sure to continue adding PCISLOT#2 of PCIBOX#1 to Partition#4? [Y/N] Y
Adding PCISLOT#2 of PCIBOX#1 to Partition#4 has been completed successfully.
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
Are you sure you want to add %s to Partition#%d? [Y/N]:
Adding %s to Partition#%d has been completed successfully.
The specified partition number is invalid.
The specified [PCI_Box# | PCI Slot#] is invalid.
The specified partition doesn't have PCI Box#%d.
Parameter missing
The specified parameter is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'add extended partition pcibox' command.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to set configuration because this Extended Partitioning is powered on.
Partition#x is not defined.
The specified PCI Slot#x is not free.
398
CA92344-0539-04