Show Partition Extended_Socket_Zone - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.3 Commands for Display

2.3.44 show partition extended_socket_zone

Displays the The setting of Extended Socket Zone.
Output Format:
The information relates to one Extended Partitioning is displayed in one line. The display contents of each
line are as follows.
First line:
Second line:
Third line:
Fourth line:
Fifth line:

Privilege: Aｌｌ
(1) Input format
show partition extended_socket_zone
(2) Option
None
(3) Usage example

Example:Extended Socket Zone is displayed.
# show partition extended_socket_zone
4 0
5 0
6 0
7 0
8 2
9 2
10 3
11 3
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
The specified partition number is invalid.
The specified command is not supported.(error=[%s])
Unable to execute this command on a standby MMB.
Failed to execute 'show partition extended_socket_zone' command.
Extended Partitioning#x is not defined.
Extended Partitioning number
Physical Partition number
Power Status (On/Standby)
Extended Socket Modesetting(enable/disable)
Zone number
Standby enable 0
On enable 0
On disable
Standby disable none
On disable none
On enable
On enable 3
On enable 3
471
none
1
CA92344-0539-04