Figure 1.77 [Mode] Window (Extended Partition) - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E

FIGURE 1.77 [Mode] Window (Extended Partition)

When the [Apply] button is clicked while the partition is powered on, a warning dialog box "W_00487 Unable
to change the mode, because this partition is powered on" is displayed.
When the partition is already powered off, the settings are reflected without displaying the dialog box.
Extended Partitioning Mode can be changed only when the Power status of Physical Partition is Off. If
Physical Partition is to be changed while it is powered on, a warning dialog box such as "W_00552 the
Extended Partitioning mode cannot be changed while the Physical Partition is powered on. Please try to
change the Extended Partitioning mode after the Physical Partition is powered off." is displayed and settings
are prohibited.
When SB with DIMM configuration that does not satisfy requirements of Mode configures the Mode for the
partition configured in a Reserved SB, a confirmation dialogue box is displayed. At the time of switching to
the Reserved SB, a warning message of Mode cancellation is displayed and to confirm whether to proceed
with the setting or not.
The LAN Device Mode is displayed in IOU Unit comprised in the partition specified by the LAN Device Mode.
For settings, select LAN Device Mode in the IOU Unit, with the radio button and click the [Apply] button.
The setting items of Extended Partitioning Mode and LAN Device Mode are not displayed in Extended
Partition. Moreover, Entire Mode setting is prohibited and the settings cannot be changed.
When Partition contains Memory Scale-up Board, the setting of Dynamic Reconfiguration Mode cannot be
set by warning Dialog box being displayed.
CA92344-0539-04
203