Fujitsu PRIMEQUEST 2000 Series Tool Reference page 171
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E
(1)
Menu Operation
[Partition] - [Partition Configuration] - [Add Unit] button
(2)
Window Operations
1.
Select the SB or IOU to be incorporated in the partition, and then click the [Apply] button.
A confirmation dialog box appears.
2.
Click [OK] button.
The SB or IOU will be incorporated.
3.
Click the [Apply] or [Cancel] button.
Return to [Partition Configuration] window.
[Message]
This section describes the messages to be displayed on this window.
Message Number
Free node doesn't exist.
E_00045
E_00110
Failed to add the SB, IOU or Extended Partitioning to the partition.
E_00112
Unable to add the specified SB#%aa to the partition due to CPU mismatch between
SBs.
E_00424
Unable to add the specified SB to the partition due to CPU composition abnormal.
E_00425
Unable to add the specified SB to the partition due to DIMM composition abnormal.
E_00490
Unable to add the specified SB to the partition due to DIMM does not satisfy
requirements of Mode.
W_00505
Unable to set configuration because the power on/off is processing. Please execute it
after a while again.
E_00519
Unable to add the specified SB to the partition due to SB composition abnormal.
W_00593
Unable to add the specified SB to the partition due to Dynamic Reconfiguration Mode.
For details on the messages displayed on the window, see
(CA92344-0540).
When multiple errors are detected, multiple errors are displayed in the dialog box.
Message
PRIMEQUEST 2000 Series Message Reference
170
CA92344-0539-04
Advertisement
Table of Contents
